Description
The LP200 Pressure Transmitter was designed to measure Pressure or Level within industrys most demanding corrosive process applications. When measuring pressure It can be mounted vertically or horizontally, and can easily be installed into a threaded process pipe tee fitting.
The LP200 implements a state of the art ceramic measuring principle that changes the physical pressure which equates to no more than a few microns into a linear electronic signal that can be measured. This minimal deformation equates to negligible material strain of the ceramic electronic pressure-sensing diaphragm resulting in high resistance to alternating loads and long-term durability. Exactly what is required for tough industrial applications.
Features:
- PP | PVDF | 316 SST Body
- Optional LED Display
- 0 – 100 PSI Pressure Range | (Other PSI Ranges Available)
- Output | 4-20mA | 2 Wire Loop Powered
- NPT | G | Union Type Connection
- Ceramic Sensing Diaphragm
- No Programming Required
Reviews
There are no reviews yet.